|
Each Beech Creek Candle is hand-crafted to order. The candle
you order is carefully hand-measured, melted, fragranced, wicked,
poured, and packaged. The extra care we take can be seen in every
candle we make.
Soy Wax
We start with the highest quality soy wax available. This 100% pure
soy wax has been developed specifically for candles and is both
environmentally-friendly and renewable. It is made from soy beans
grown and processed exclusively in the United States. Unlike paraffin,
soy waxes burn cleaner and longer and retain their fragrance for a
longer period of time.
Fragrance Oils
Fragrance oils are one of the most important ingredients we considered
when starting Beech Creek Candles. High-quality, rich
fragrances that blend well with the base wax can only be achieved by
using high-quality fragrances. Every fragrance we offer has been
tested for compatibility and scent throw (both hot and cold) to assure
a great smelling candle.
Wicks
The wicks we use are 100% braided cotton. We do not use cored wicks,
as the impurities in the core metal contribute to dirtier burning.
Please try to keep your wicks trimmed to no more than 1/4" for optimum
candle performance. Our wick sizes are chosen to minimize the
"tunneling" you are probably familiar with. It is recommended that you
burn your Beech Creek Candles for a full 4-6 hours at a time to allow
the melt pool to extend across the surface of your candle to a depth
of between 1/4 to 1/2-inch. Frequent shorter burn times contribute to
the tunneling effect.
How your candles are
made
Once your order has been
received, the amount of soy wax needed for each product is carefully
measured and melted to its proper melting temperature. While the wax
is melting, each wick is prepared for the container type you have
chosen.
Once melted, the wax is colored
using our custom color recipes developed for each fragrance.
When the proper color has been
achieved, the wax is allowed to cool slightly before adding the
fragrance oil, which is then blended into the wax for a full five
minutes.
After the fragrance oil has been
blended, the wax is ready for pouring.
Once poured, the candle is
allowed to cure. Wicks are then trimmed and the final product is
assembled, labeled, and prepared for shipping.
Candle Product
offerings
Tart
One ounce tarts, used in either electric or tealight
"powered" warmers.
Votive
Two ounce votives. For safety reasons, votives should be burned in a
votive candle holder.
5 oz. Jar
Five ounce Apothecary Jar, with flat lid.
10 oz. Jar
Ten ounce Apothecary Jar, with flat lid.
16 oz.Jar
Sixteen ounce Apothecary Jar, with flat lid.
Always Use Safety
With Candles!
- Remove any labels prior to burning.
- For best results trim the wick to 1/8 of an
inch each time, before lighting.
- Place candles on a flat, leveled, heat
resistant surface.
- Keep away from children, pets, bedding, and
anything flammable.
- Keep burning candles away from drafts, vents,
or any air flow.
- Candle and glass becomes hot during burn,
handle with caution.
- Do not drop foreign matter, wick trimmings,
or matches into wax pool.
- Never leave a burning candle out of sight or
unattended.
- Always burn candles in a well-ventilated
room.
- Use caution when extinguishing candle.
- If smoke occurs, candle flickers repeatedly,
or the flame becomes too high extinguish candle. Let candle set and
cool, move from draft and re-light.
- Recommended burn time is 2-3 hours at a time.
|